AquaPruf 7600 ULTIMATE Series Conveyors

 7600 ULTIMATE Series Conveyors

7600 ULTIMATE End Drive
7600 ULTIMATE Motorized Pulley

Accessories Stands Profiles Belts Accessories Support Stands Profiles Drive Mounting Packages Belting Gearmotors


The Ultimate Series has been engineered for Fast & Effective Sanitation in the most demanding environments. These include RTE foods, raw protein (meat - poultry - fish), dairy and other environments with high pressure sanitation requirements.


  • ​Load: 20 lbs/square-foot of belt 
  • Belt widths: 6" to 36" 
  • Lengths: 36" to 40' 
  • Belt speed: 233 ft/min maximum 
  • Solid urethane belting, includes belt scraper 
  • UHMW wear strip bed plate 
  • Continuous TIG welded 304 stainless steel frame 
  • #4 Polish on all frame surfaces 
  • Bearing material is 400 stainless steel 
  • Bearing lubricant is H1 type FDA lubricant 
  • USDA accepted belting 
  • Meets USDA, NSF & AMI design specifications 

Features & Benefits

  • USDA LogoFrame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10' long consist of multiple sections which are bolted together (can be welded together on site). 
  • Bearings are mounted in cast stainless steel housing for maximum performance in washdown environments.
  • Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
  • The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
  • Solid Urethane belt is sprocket driven for consistent performance and has no bacteria harboring hinges or pins.
  • Open Belt Tracking Flanges and solid UHMW idler pucks create access to pulleys. 
  • Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
  •  Drive sprockets are located on a 1.5" square stainless steel shaft without fasteners to provide optimum drive strength and cleanability 
  • Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
  • Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
  • TIG welded stand offs keep fasteners out of the food zone. 
  • Ultimate Design


     Cleaning Channels  Idler Pucks
     Internal Finish  Tail Pulleys
     Tail Removal  Solid Members
     Welded Standoffs  Groove Spindle Guard
     SS Teathers  Threadless Feet